Woodstain Aqua (Water based)

Modo de empleo :

– NEW WOOD: Clean, sand thoroughly and remove dust. It is advisable to apply a first layer of Protective Primer for wood or Anti-woodworm. Apply one or more undiluted coats as a finish, sanding between coats. Important: In tropical woods such as chestnut, oak, etc. that are rich in tannins, it is advisable to clean them previously with a cloth soaked in non-greasy solvents such as acetone; On the other hand, resinous woods such as pine must be cleaned with fatty solvents such as turpentine.

– VARNISHED WOOD: Sand gently and clean. Apply one or two coats without diluting. If it is in very poor condition, the existing varnish will be removed and proceed as new wood.

Presentación:

Containers: 750 ml & 4 L

Acrylic Dispersion

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.
• On the outside, do not apply colorless lasur alone (always accompany a layer of pigment).

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.