Wood Effect Enamel

Modo de empleo :

The surface must be completely clean, dry and free of grease. In non-porous materials, it will be sanded with the necessary tool. Depending on the type of support, we will use the appropriate primer, ensuring that it is well adhered and dry.

Mix the product well before using it, and without diluting it. Using a 7 to 8 cm simple brush with natural bristles, apply an abundant and uniform layer that will be finished with long brush strokes in the desired direction to mark the grain, gently passing the tip of the brush in continuous, parallel or slightly wavy in the same direction.

If we want to mark the grain more, we can make some irregular cuts on the shoulder and proceed in the same way.

Presentación:

Containers: 750 ml

Alkyd resins

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.