Telacril Transparent

Acrylic, elastic and transparent varnish. Prepared to complement our line of Telacril waterproofing products, but in no case should it be considered a substitute for them. It provides acceptable elasticity and flexibility, waterproofing vertical supports, but above all it is characterized by its transparent property, which makes it ideal for waterproofing stone facades, exposed brick, etc.

Advantage:

Transparent Property

Modo de empleo :

Preparation of the support: the surfaces must be clean, dry and free of grease and saltpeter. Once prepared, it is recommended to apply a first coat diluted 1:1 in water as a primer. Subsequently, the necessary layers will be applied directly to use or with a slight dilution.

Presentación:

Containers: 750 ml, 4 & 15 L

Naturaleza: Acrylic copolymers in emulsion

Precauciones:

Do not apply at temperatures below 5 ºC or above 30 ºC.
Do not apply at risk of frost or rain.
Do not apply in strong wind conditions or under direct sun.
Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.

Almacenamiento:

In its original closed container, at non-extreme temperature and humidity.
Keep away from direct sunlight.
Maximum recommended since manufacturing: 2 years.

Color producto: Transparent

Aspecto: Satin

Tipo: al_agua

Diluyente: Thinner for water-based paints and enamels

Secado: 2-3 hours

Rendimiento: 6 - 8 m²/L/Coat (variable depending on type and application)

Tinción: 6 - 8 m²/L/Coat (variable depending on type and application)

Repintado: 7 hours

Resistencia: Clase 1 (según norma UNE-EN 13300); >10000 ciclos (según norma UNE-EN 48243)

Herramienta: Brush, roller, spray gun or airless

Telacril Transparent

Ficha de seguridad

Related products