Satin Alkyd Enamel

It is a satin alkyd enamel with great covering power, formulated with special alkyd resins and pigments of proven resistance and stability to light, which provides top-quality finishing levels.

It is a product with the “high solids” technique, so it is recommended to apply thin layers and respect the drying and repainting times in order to obtain the best and maximum benefits.

Advantage:

Excellent covering power.
Easy to apply, does not sag, excellent leveling.

Modo de empleo :

Stir the contents of the container well. Apply by brush and roller at original viscosity. If applied by spray gun, adjust the viscosity with suitable thinners. The surfaces must be clean and dry, free of rust, dust, grease, saltpeter, moisture, etc. Surfaces containing old paint must be scratched and cleaned in its entirety to ensure adherence to them. When applying on wood and plaster, the surface must be previously prepared with Synthetic Sealer or our Multipurpose water-based. On iron and steel, the surface must be previously protected with Antioxidant Primer or Electrolytic Lead Minium. On galvanized steel and alloys, perform a suitable pretreatment. As it is a high-solids product indoors, a single coat of Enamel may suffice. Outside it is convenient to finish with 2 or 3 hands. WARNING: Alkyd products may yellow slightly in the dark or on supports that reach high temperatures.

Presentación:

Containers of: 125 ml; 375ml; 750 ml; 4 liters

Naturaleza: Alkyd resins

Precauciones:

Do not apply at temperatures below 5ºC or above 30ºC.
Do not apply with risk of frost or rain.
Do not apply in conditions of strong winds or in direct sunlight.
Avoid using different batches in the same cloth or, failing that, mix the current bottle with the next one at 50% to reduce the normal differences between batches.

Almacenamiento: