Aural Hogar Graphene Emulsion Paint

Modo de empleo :

ON NEW CLEAN, DRY AND FREE SURFACES OF RUST, GREASE OR SALITRE OF: Cement and concrete: Once set. Directly, diluting up to 10-15% for the first layer. If it were very absorbent it would be set beforehand. If there are support defects, putty with a suitable product or on excessively polished surfaces, sand to open the pore. Plaster, plaster or wood: Fixing or sealing previously with products appropriate to each case. Diluting up to 10% in the first coat. ON OLD PAINTED SURFACES: With paints in good quality condition: Wash and sand gently, putty if necessary and then apply. With paints in poor condition: Remove and proceed as a new surface. If alkalinity is detected in the support, it must be corrected.

Presentación:

Containers: 750 ml,  4 & 15L

Naturaleza: Pure acrylic copolymers

Precauciones:

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.

Almacenamiento:

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.

Memoria Descriptiva: On simple applications The cladding of the façade and other exterior vertical elements, as well as the painting and/or decoration inside, will be carried out with Aural Hogar from the Jafep Painting company. The performance will be 10 to 15 m²/L and layer. The support must be clean, dry and free of rust, dust, grease, salt and moisture. The manufacturer's general recommendations will be respected.

Color producto: White

Aspecto: Matt

Aspecto aplicado: Matt

Tipo: al_agua

Diluyente: Thinner for water-based paints and enamels

Secado: 45 minutes

Rendimiento: 10 - 15 m²/L/Coat

Tinción: 10 - 15 m²/L/Coat

Repintado: 6 - 8 hours

Resistencia: Class 1 (UNE-EN 13300 Standard); >10000 cycles (DIN 53778 Standard)

Viscosidad: 10,500 ± 1500 cp (at Brookfield)

Curado: 28 days

Permeabilidad al agua líquida: 28 days

Herramienta: Brush, roller, spray gun or airless