Pinroda Low Cost

Modo de empleo :

On all kind of surfaces that are duly clean, dry, set and free from grease:

- On new concrete or plaster surfaces: Apply directly but dilute to 25% for the first coat. - On old painted surface in good condition: Wash, and sand previously. On old painted surface in bad condition: Remove and proceed like a  new surface. Even sanding: Apply a primer undercoat or Sellacryl  JAFEP.

Presentación:

• Do not apply at temperatures below 5 ºC nor above 30 ºC.
• Do not apply with risk of frost or rain.
• Do not apply in strong winds or under direct sun.
• Avoid using different batches on the same cloth or, failing that, mix the current pot with the next one at 50% to reduce the normal differences between batches.

• In its original closed container, at not extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.