Nívex
Documentación

Ficha Seguridad

Nívex

High quality emulsion paint. Made with resins and pigments of great resistance and light fastness. It provides particularly white, matte, covering, washable and resistant finishes. Easy application. It is breathable. It contains specific anti-mold preservatives that provide excellent protection to the paint film applied using our anti mould system.

Product information

Modo de empleo :

ON NEW CLEAN, DRY AND FREE SURFACES OF RUST, GREASE OR SALITRE OF: Cement and concrete: Once set. Directly, diluting up to 15% for the first layer. Plaster, plaster or wood: Fixing or sealing previously with products appropriate to each case. Diluting up to 15% in the first coat. ON OLD PAINTED SURFACES: With paints in good quality condition: Wash and sand gently, putty if necessary and then apply. With paints in poor condition: Remove and proceed as a new surface. If alkalinity is detected in the support, it must be corrected.   * In all cases it is advisable to dilute it to apply it in thin layers, since this will achieve the most optimal results.

Presentación:

Containers: 750 ml, 4 & 15 L

Naturaleza: Acrylic copolymers
Precauciones:
  • Do not apply at temperatures below 5 ºC or above 30 ºC.
  • Do not apply at risk of frost or rain.
  • Do not apply in strong wind conditions or under direct sun.
  • Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.
Almacenamiento:
  • In its original closed container, at non-extreme temperature and humidity.
  • Keep away from direct sunlight.
  • Maximum recommended since manufacturing: 2 years.
Memoria Descriptiva: In simple applications The painting and/or decoration, especially indoors but also outdoors, of masonry surfaces will be carried out with Nívex Plastic Paint from the Jafep Paints company. The performance will be 8 to 12 m²/L and Coat. The support must be clean, dry and free of rust, dust, grease, salt and moisture. The manufacturer's general recommendations will be respected.
Color producto: White
Aspecto: Matt
Aspecto aplicado: Deep Matt
Tipo: al_agua
Diluyente: Thinner for water-based paints and enamels
Secado: 30 minutes
Rendimiento: 8-12 m²/L/Coat
Tinción: 8-12 m²/L/Coat
Repintado: 3-4 hours
Resistencia: Class 2 (UNE-EN 13300 Standard); >5000 cycles (DIN 53778 Standard)
Viscosidad: 12,000 ± 1,500 cp (at Brookfield)
Curado: 28 days
Permeabilidad al agua líquida: 28 days
Herramienta: Brush, roller, spray gun or airless

Related products