Jafep Anti-Woodworm

Modo de empleo :

The application must always be on exteriors, both of Jafep Anti-Woodworm and its subsequent finishing layer (Only for Class 2 and 3 uses according to DS/EN335:2013).

Clean, sand and remove dust. In the case of painted wood, strip it completely. Apply with a brush or roller. Apply without diluting and after 24 hours of application, always finish with a finishing product (varnish, lasur, etc.).

A dosage of 200 ml product/m² is recommended, without exceeding it.

To clean the tools, use mild soap and water.

Presentación:

Containers: 750 ml & 2,5 L

Biocide

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply if the relative humidity is greater than 80%.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Use only in doses of 200 ml/m2 with application by brush and/or roller.
• Do not use on wooden pieces in direct contact with food or feed.
• Do not use indoors, treated wood should only be used indoors for exterior window and door frames.
• Do not use near aquatic environments such as streams, lakes, etc.

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.