Esencial Supercubriente

Modo de empleo :

ON NEW CLEAN, DRY AND FREE SURFACES OF RUST, GREASE OR SALITRE OF:

Cement and concrete: Once set. Directly, diluting up to 10% for the first layer.

Plaster, plaster or wood: Fixing or sealing previously with products appropriate to each case. Diluting up to 10% in the first coat.

ON OLD PAINTED SURFACES:

With paints in good quality condition: Wash and sand gently, putty if necessary and then apply.

With paints in poor condition: Remove and proceed as a new surface. If alkalinity is detected in the support, it must be corrected.

Presentación:

Containers: 750 ml, 4, 8 & 15 L

Acrylic Copolymers

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.

In simple applications

The painting and/or decoration, especially indoors but also outdoors in less aggressive conditions, of masonry surfaces will be carried out with the Essential Super-covering Plastic Paint from the Pinturas Jafep company. The performance will be 7 to 9 m²/L and layer. The support must be clean, dry and free of rust, dust, grease, salt and moisture. The manufacturer’s general recommendations will be respected.