Bathroom Ceiling Paint

Modo de empleo :

ON NEW, CLEAN, DRY SURFACES FREE OF RUST, GREASE OR SALTPETER OF:

Cement and concrete: Once set. Directly, diluting up to 10% for the first coat.

Plaster, plaster or wood: Fixing or sealing previously with products suitable for each case. Diluting up to 10% in the first coat.

ON OLD PAINTED SURFACES:

With paints in good quality condition: Wash and sand lightly, putty if necessary and apply afterwards.

With paintings in poor condition: Remove and proceed as a new surface. If alkalinity is detected on the support, it must be corrected.

Presentación:

Containers: 1 L

Acrylic Copolymers

• Do not apply at temperatures below 5ºC or above 30ºC.
• Do not apply with risk of frost or rain.
• Do not apply in conditions of strong winds or in direct sunlight.
• Avoid using different batches in the same cloth or, failing that, mix the current can with the next at 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep out of direct sunlight.
• Maximum recommended since manufacture: 2 years.

On simple applications

The interior painting and/or decoration of masonry surfaces, mainly bathroom ceilings, will be done with Paint for bathroom ceilings from the company Pinturas Jafep. The yield will be from 7 to 9 m²/L /Coat. The support must be clean, dry and free of rust, dust, grease, salt spray and moisture. The general recommendations of the manufacturer will be respected.