Modo de empleo :
ON NEW, CLEAN, DRY SURFACES FREE OF RUST, GREASE OR SALTPETER OF:
- Cement and concrete: Once set. Directly, diluting up to 10% for the first coat.
- Plaster, plaster or wood: Fixing or sealing previously with products suitable for each case. Diluting up to 10% in the first coat.
ON OLD PAINTED SURFACES:
- With paints in good quality condition: Wash and sand lightly, putty if necessary and apply afterwards.
- With paintings in poor condition: Remove and proceed as a new surface. If alkalinity is detected on the support, it must be corrected.
Presentación:
1L Plastic Pot
Naturaleza: Acrylic Copolymers
Precauciones:
- Do not apply at temperatures below 5ºC or above 30ºC.
- Do not apply with risk of frost or rain.
- Do not apply in conditions of strong winds or in direct sunlight.
- Avoid using different batches in the same cloth or, failing that, mix the current can with the next at 50% to reduce the normal differences between batches.
Almacenamiento:
- In its original closed container, at non-extreme temperature and humidity.
- Keep out of direct sunlight.
- Maximum recommended since manufacture: 2 years.
Color producto: Gold, Silver & Copper
Aspecto: High Satin or Semi-Gloss
Tipo: al_agua
Diluyente: Diluyente para pinturas y esmaltes al agua
Secado: 45 – 60 minutes
Rendimiento: 10 – 12 m²/L/Coat
Tinción: 10 – 12 m²/L/Coat
Repintado: 6 hours
Resistencia: Paletina, brush or roller
Herramienta: Paletina, Brush or Roller
Carta Colores