Matt Emulsion Paint Exterior/Interior 900 Multicolor Base for Tinting Systems

Modo de empleo :

It can be applied with a brush, roller or spray gun. All supports will be clean, dry, free of grease and saltpeter. If the surface is new, it will be applied directly, but diluting the first coat with 10-15%. If it is very absorbent, it will be fixed previously. If the surface is already painted and in good condition, it will also be applied directly, but if not, the paint must be removed to proceed as a new surface. Due to the matt finish, a tinting chart with the same or similar finish to the product to be tinted must be used to avoid differences in the results caused by differences in gloss (RAL for Glossy, Jafep Standard or NCS for Matte finishes, etc.)

Presentación:

Containers: 750 ml, 4 & 15 L

Naturaleza: Acrylic copolymers

Precauciones:

• Do not apply at temperatures below 5ºC or above 30ºC.
• Do not apply with risk of frost or rain.
• Do not apply in conditions of strong winds or under direct sunlight.
• Avoid using different batches in the same work or mix the current pot with the next 50% to reduce the normal differences between batches.

Almacenamiento:

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacture: 2 years.

Color producto: Color charts NCS, RAL, ASF, etc.

Aspecto: Matt

Tipo: al_agua

Diluyente: Water

Secado: 30 minutes (Touch)

Rendimiento: 12-14 m²/L/Coat

Tinción: 12-14 m²/L/Coat

Repintado: 6-8 hours

Resistencia: Class 1 (according to UNE-EN 13300 Standard); >10,000 cycles UNE 48243

Herramienta: Brush, roller, spray gun or airless

Limpieza: Water