Pin Sport Water-Based Emulsion Paint. For Sports Courts

Modo de empleo :

• Cement and concrete: Once set. Directly, diluting up to 10% for the first coat.

• With paints in good quality condition: Wash and sand lightly, putty if necessary and apply afterwards.
• With paintings in poor condition: Remove and proceed as a new surface. If alkalinity is detected on the support, it must be corrected.
• Anti-slip version: To obtain a product with the highest anti-slip category, add 100 g of silica sand (55/60) or reflective glass microspheres (EchoStar 5) to each liter of product. Shake until perfect homogenization.

Presentación:

• Do not apply at temperatures below 5ºC or above 30ºC.
• Do not apply with risk of frost or rain.
• Do not apply in conditions of strong winds or in direct sunlight.
• Avoid using different batches in the same cloth or, failing that, mix the current can with the next one at 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacture: 2 years.