Nitrocellulose Lacquer

Modo de empleo :

– NEW WOOD: Clean, sand thoroughly and remove dust. Apply a first layer of Nitro Filler Primer which, once dry, will be sanded appropriately. Apply one or more undiluted coats as a finish.

– VARNISHED WOOD: It will be cleaned and sanded, if it is in good condition. If it were in very poor condition, all the existing varnish would be removed. It is advisable to do some compatibility testing with previous layers.

Cleaning tools with nitrocellulose solvents.

Presentación:

Containers: 750 ml  & 5 L

Nitrocellulose resins combined with alkyds

• Do not apply at temperatures below 5 ºC or above 30 ºC.
• Do not apply at risk of frost or rain.
• Do not apply in strong wind conditions or under direct sun.
• Avoid using different batches in the same cloth or, failing that, mix the current jar with the next one 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep away from direct sunlight.
• Maximum recommended since manufacturing: 2 years.