Acrimar Water-based Acrylic Enamel with Polyurethane

Modo de empleo :

Stir the contents of the container well. Apply by brush, roller or spray to clean, dry, dust-free and properly prepared surfaces.

PAINTED SURFACE: If the surface is in good condition, wash, sand and directly apply Acrylic Enamel to Acrimar Water. Otherwise, completely remove the old paint and proceed as unpainted surface.

UNPAINTED SURFACES:

Wood: Apply a coat of Multipurpose water-based or Water-based Sealant.

Metal: Apply a layer of Multipurpose or water-based antioxidant primer.

Walls: Apply “Acrimar” directly or prepare with Sellacryl.

Presentación:

Containers of: 250 ml, 750 ml, 4L e 15L

Acrylic copolymers

• Do not apply at temperatures below 5ºC or above 30ºC.
• Do not apply with risk of frost or rain.
• Do not apply in conditions of strong winds or in direct sunlight.
• Avoid using different batches in the same cloth or, failing that, mix the current can with the next at 50% to reduce the normal differences between batches.

• In its original closed container, at non-extreme temperature and humidity.
• Keep out of direct sunlight.
• Maximum recommended since manufacture: 2 years.